IPS031G |
RFQ for IPS031G Required Field |
 |
| Technical/Catalog Information | IPS031G |
| Vendor | International Rectifier |
| Category | Integrated Circuits (ICs) |
| Package / Case | 8-SOIC (3.9mm Width) |
| Mounting Type | Surface Mount |
| Type | Low Side |
| Voltage - Supply | 4 V ~ 6 V |
| On-State Resistance | 45 mOhm |
| Current - Output / Channel | 2.2A |
| Current - Peak Output | 15A |
| Packaging | Tube |
| Input Type | Non-Inverting |
| Number of Outputs | 1 |
| Operating Temperature | -40°C ~ 150°C |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | IPS031G IPS031G |
| Product | Manufacturers | Pack | D/C |
| IPS031G | - | SOP-8 | 00+ |
The IPS031G/IPS032G are fully protected single/dual low side SMART POWER MOSFETs that feature overcurrent, over-temperature, ESD protection and drain to source active clamp.These devices combine a HEXFET® POWER MOSFET and a gate driver. They offer full protection and high reliability required in harsh environments. The driver allows short switching times and provides efficient protection by turning off the power MOSFET when the temperature exceeds 165 or when the drain current reaches 12A. The device restarts once the input is cycled. The avalanche capability is significantly enhanced by the active clamp and covers most inductive load demagnetizations.
Features |
| • Over temperature shutdown• Over current shutdown• Active clamp• Low current & logic level input• E.S.D protection |
| Symbol | Parameter | Min. | Max. | Units | Test Conditions |
| Vds | Maximum drain to source voltage | - | 47 | V | |
| Vin | Maximum input voltage | -0.3 | 7 | ||
| Iin, max | Maximum IN current | -10 | +10 | mA | |
| Isd cont. | Diode max. continuous current (1) (rth=125/W) IPS031G (for all sd mosfets, rth=85/W) IPS032G |
- - |
1.4 2 |
||
| Isd pulsed | Diode max. pulsed current (1) (for ea. mosfet) | - | 15 | ||
| Pd | Maximum power dissipation(1) (rth=125/W) IPS031G (for all Pd mosfets, rth=85/W) IPS032G |
- - |
1 1.5 |
W | |
|
ESD1 |
Electrostatic discharge voltage (Human Body) | - | 4 | kV | C=100pF, R=1500Ω, |
| ESD2 | Electrostatic discharge voltage (Machine Model) | - | 0.5 | C=200pF, R=0Ω, L=10µH | |
| T stor. | Max. storage temperature | -55 | 150 | ||
| Tj max. | Max. junction temperature | -40 | 150 |
| Models | MFG | Pack |
| IPS013G | ||
| IPS0151 | TO-220 | |
| IPS0151S | TO-263 | |
| IPS0151STRL | ||
| IPS0151STRR | ||
| IPS021 | TO220 | |
| IPS021L | ||
| IPS021LTR | ||
| IPS021S | TO-263 | |
| IPS021STRR | ||
| IPS022 | ||
| IPS022G | SMD-8 | |
| IPS022GTR | ||
| IPS024G | ||
| IPS031 | 07+ | |
| IPS0316 | ||
| IPS031F | ||
| IPS031G | SOP-8 | |
| IPS031GTR | ||
| IPS031R | ||
| IPS031RTRL | ||
| IPS031S | ||
| IPS031STRR | ||
| IPS032G | 06+ | |
| IPS041 | ||
| IPS0412 | ||
| IPS041L | SOT223 | |
| IPS041LTR | ||
| IPS0426 | ||
| IPS042G | ||
| IPS031 | ||
| IPS024G | ||
| IPS022GTR | ||
| IPS022G | ||
| IPS021S | ||
| IPS021LTR | ||
| IPS021L | ||
| IPS021 | ||
| IPS0151STRL | ||
| IPS0151S | ||
| IPS0151 | ||
| IPR5SAD7/1 | ||
| IPR5SAD6 | ||
| IPR5SAD5 | ||
| IPR5SAD3 | ||
| IPR5SAD2104 | ||
| IPR5SAD2 | ||
| IPR5SAD1 | ||
| IPR5FAD7/1 | ||
| IPR5FAD6 |
